Thread Grip Heat Activated – 15ml

£21.55

THREAD AND HEAD SOLUTIONS is not VAT registered

For parts that you would like us to Pre-Apply THREAD GRIP to (subject to minimum quantity) – please simply e-mail your enquiry detailing quantity, item to be patched, and material to sales@threadandheadsolutions.co.uk

What is THREAD GRIP

THREAD GRIP is a high quality, reliable, low cost, thread locking liquid solution specifically engineered for a wide range of industrial and domestic applications.

THREAD GRIP is a special blend of methacrylic resins and copolymers. When applied, THREAD GRIP retains its viscous properties allowing it to flow, thus taking up any manufacturing tolerances within the assembled joint. Prevents loosening in applications that are exposed to even extreme vibration.

The formula is non-anaerobic and non-reactive. THREAD GRIP does not require cleaners, primers or additives. It does not degrade plastics, seize parts in place or depend on a chemical reaction

Why THREAD GRIP?

PRODUCT BENEFITS of THREAD GRIP

THREAD GRIP reliably seals and locks parts in place where there is extreme vibration
THREAD GRIP is non-corrosive and does not degrade parent materials
THREAD GRIP bonds with all metals, glass, most plastics, aluminium etc
THREAD GRIP minimises galling and stripping of threads
THREAD GRIP will not harden like anaerobic thread locking products
THREAD GRIP can be removed and re-installed multiple times for maintenance purposes
THREAD GRIP is suitable for threaded, and non-threaded parts
THREAD GRIP impervious to fresh and salt water
THREAD GRIP requires no additives or primers
THREAD GRIP reduces wastage by brushing onto the application
THREAD GRIP has indefinite shelf life, even when applied
THREAD GRIP meets or exceeds global Industrial, military and OEM standards

THREAD GRIP Method of Use / Instructions:

Part degreasing is not required prior to application. Apply THREAD GRIP liberally with the brush provided – a length of 1 to 1 1/2 times the fastener diameter, filling the threads approx 30 / 50% anywhere along the thread where it will be engaged. Allow the THREAD GRIP to dry, leaving coated parts ready for assembly or to be stored indefinitely for later use.

	Plastic	Brass	Aluminium	Stainless Steel	Non FE	Glass
Plastic
Brass
Aluminium
Stainless Steel
Non FE
Glass

THREAD GRIP Method of Use / Instructions

Part degreasing is not required prior to application. Apply THREAD GRIP liberally with the brush provided – a length of 1 to 1 1/2 times the fastener diameter, filling the threads approx 30 / 50% anywhere along the thread where it will be engaged. Allow the THREAD GRIP to dry, leaving coated parts ready for assembly or to be stored indefinitely for later use.

THREAD GRIP APPLICATION PERFORMANCE

*Specification

Breakaway Torque	No distinct hard breaking, Slow, gradual release
Prevailing Torque	Continued and constant resistance to rotation
Cured Appearance	Resilient plastic
Shelf Life	Indefinite
Chemical Resistance	Resistant to many common fluids
Corrosion Resistance	Resistant to acid / alkali: corrosion barrier
Water/Weather Resistance	Impervious to tap and salt water
Operational Temperature	-50 C to 75 C (-60 F to 170 F)
Applicable Materials	All metals, glass, most plastics, etc
Re-Useable	Yes

TECHNICAL CONTINUED

*The information provided is based on technical data that Thread & Head Solutions Ltd believes to be reliable. Since we cannot anticipate or control the application or installation conditions under which our product is used, we cannot guarantee the applicability of this information or the suitability of our product in any individual situation. Therefore, the product is sold without warrantee expressed or implied.

TDS – Click Here
SDS – Click Here

Thread And Head Solutions Limited

My Cart

Thread Grip Heat Activated – 15ml

THREAD GRIP Method of Use / Instructions: